Triple Axle
Model:
SDR342-49 | SDR344-60 | SDR348-4986
Frame Length
SDR342-49 – 42′
SDR344-60 – 44’
SDR348-4986 – 48’
Width
102″
Height
Tub Down 100″
In Dump Position 129″
Trailer Weight
17,800 lbs
Tub Length
36′ Tub
38′ Tub
40′ Tub
Tub Capacity
36′: Water Level (23 cu yds); Strike-Off (32 cu yds)
38′: Water Level (24 cu yds); Strike-Off (34 cu yds)
40′: Water Level (25 cu yds); Strike-Off (36 cu yds)
Other Features:
| Dump Angle | 42 degrees |
| Kingpin | Standard: 18″ Optional: 23″ |
| Landing Gear | Standard: Manual retracted with multiple height settings, 20″ clearance Optional: Crank Landing Gear |
| Suspension | Standard: Recyo AR23 Air Ride Optional: Spring |
| Axles | Reyco 25,000 lbs Optional: Lift |
| Wheels | Standard: 11r 22.5 Steel Optional: 11r 22.5 Aluminum 11r 24.5 Steel 11r 24.5 Aluminum 385 Super Singles 425 Super Singles Other options available upon request |
| Tires | 16 ply 18/32″ tread depth |
| Mud Flaps | Ultra rubber spray suppressing with Sidump’r logo |
| Hydraulics | 1″ steel lines surrounded by rubber garments. |
| Cylinder | 3-stage single cylinder. As each stage extends out, the dump cycle becomes faster. More push and pull power than any 2-cylinder model. 2-year warranty. |
| Tub | 1 piece rolled AR450 tub. No center divider. Haul anything without the distraction of trying to work around the tub divider. |
| Lights | Grote LED 12 Volt rubber mount sealed lighting and harness system with 7 pole electrical socket. |
| Fenders | Front: Fender belting Rear: Minimizer fenders Optional: Belting |
| Pivot Joints | Composite bushing roller pin design requires no greasing. |
| Read Push Block | Bolt on for ease of repair. Options include DOT bumper only, push block only or combination of both. |
| Abs | Haldex 2S1M |
| Safety | Red and white conspicuity markings & tub latching system meets D.O.T. secured load requirements at all times while traveling down the road! |
| Colors | Yellow, black, white, grey, or custom colors. 2 year paint warranty. |
| Tarp System | Areo 2 tarp system with mesh net and safety switch |
| Options | See our Specialty & Options page. |
Drawing Specifications:
342-492015
344-602015
348-67-52015
